Posts tagged filter
Synonyms: filters
If we have the transfer function of a LC high pass filter: $H(s) = \frac{sL}{sL+\frac{1}{sC}}$ If we want to find the pole of that filter in the end we get: $s = \frac{j}{\sqrt{LC}}$ and for a ...
I have decided to try design a band-pass filter with a cut-off frequency of 10kHz and bandwidth of 2 Hz. $$ \frac{1}{\sqrt{LC}} = 10001 \rightarrow LC = 1/100020001 sec^{2}$$ $$ \frac{R}{L} = 2...
[Disclaimer. This is not for an academic class. I'm self-studying.] I’m reading an introductory book on DSP for audio and computer music [Steiglitz 1996, ISBN 0-8053-1684-1 p. 287]. One of the ...
Noise can be coupled between signal lines through parasitic capacitance formed between these signal lines, as $i = C\frac{dv}{dt}$ where C is the capacitance between the signal lines. Another wa...
Suppose we have a RC low pass filter of 1st order. If we add multiple stages every time we add a RC stage identical to our original does the slope of the curve in the bode plot db/Hz becomes wild...
Im designing a high-pass filter which has a gain of -8dB at half of the roll-off frequency and I am stuck ,I dont know how to continue the design. In the bode plot of that filter we have 2 points:...
In the block diagram of this pulse oximeter design guide , in page 6, I see that the system utilizes two analog filters, one for filtering the PPG signal generated while the RED light/wavelength is...
Despite there are many filter calculators available on the web, I still have difficulties to translate what I need into calculator design parameters. For my application, I need ideally a high pass ...
In a lot of textbooks, filters seem to be designed around a matching source and load impedance. However, If I have a filter stage between an antenna and an LNA, wouldn't I want the load impedance(i...
