Posts tagged grounding
Hi. I am just getting into PCB design and I consistently see recommendations to never share return paths between signals. It seems this is to avoid noise due to the shared impedance of the return p...
I got a vintage ('64) hifi sideboard for Christmas! It's super awesome. However, I don't understand the grounding. It has two female inputs on the backside that are labeled as "Grounding". There w...
Assume my oscilloscope is grounded, and the DUT is grounded as well (earth ground). I am using a standard 10 Mohm impedance 1:10 passive probe. So, the ground terminal of the probe is in fact con...
I'm designing a board that contains a cortex-M4 mcu working at 120MHz, and an ethernet bus with a wiznet chip that communicates with SPI. The ethernet chip gives me a phy output that goes directly...
There are various different methods to keep common mode currents off the cables, one of them being discussed on the site here and with Olin's decoupling caps post on StackExchange. Slight digressio...
I have designed a PCB that I need to work in which a microcontroller drives a 24 V brushed motor. The input power to the board is 24 V, this is then lowered to 5 V by a step down converter, and thi...
Although I have done multiple PCB designs which passed FCC and CE equivalents using the MCU's/Multiple MCU's, I have a doubt about how to approach the high speed design using FPGA SoC - main thing ...