Posts by Jasen
JEDEC seems to number them according to one less than the number of terminals, thus TRIACs, and thyristors, and darlington transiostors get 2N numbers even though they contain 3 or more junctions. ...
10Hz to 10Mhz is a wide frequency range, it would be very hard to cover that whole range in the analogue domain, as you have discovered analogue oscillators that can span more than a factor of abou...
You best source of information is boilerplate on the part itself. you have that but all there is is a part number and the design voltage. Your next best information is the boilerplate on the appl...
It's pretty much just a direct substitute for the other 555 chip. Obviously you need to take care not to overload the other parts when you increase the supply voltage. The new part's 5Mhz max mea...
CATV distribution is typically half-inch rigid coax, so it's not that. It looks more like a fibre junction box "aerial fibre terminal" in the parlance.
you want a current source start with a linear regulkator like LM340 and use the relays to switch in different load resistors.
