capacitor to overcome voltage source limitation [closed]
Closed as unclear by Olin Lathrop on May 13, 2024 at 20:14
This question cannot be answered in its current form, because critical information is missing.
This question was closed; new answers can no longer be added. Users with the Vote on Holds ability may vote to reopen this question if it has been improved or closed incorrectly.
Hello,i need to drive 5 mosfets as shown below. Each mosfet draws 15A when the pulse opens the mosfet. My power supply is gives the 48V but only 3.3A,If I understand correctly I need to put very high decoupling capacitors at the voltage source so I will have in that short period of time the 5*15=75A .
My V4 power supply in real life can supply only 4A as shown in the link and datasheet below. When i put a 10uF capacitor i cant see any higher amount of current. how do i properly simulate this capacitor phenomena In LTspice Thanks.
https://www.meanwell-web.com/content/files/pdfs/productPdfs/MW/HRPG-150/HRPG-150-spec.pdf
1 comment thread