Post History
Yes, that should work. Each sensor is then dumping a current related to its measurement onto a single common wire. Basically, the sensor outputs are summed because currents add. 10 m shouldn't b...
Answer
#1: Initial revision
by
Olin Lathrop
·
2024-12-09T21:17:23Z (8 days ago)
Yes, that should work. Each sensor is then dumping a current related to its measurement onto a single common wire. Basically, the sensor outputs are summed because currents add. 10 m shouldn't be an issue for 1 kHz. The harder problem is avoiding external noise pickup. Make sure everything is shielded to the extent it can be.