Post History
I see and from the photo left to right , the 3 regulators are ; +15, -15 , + 5.0 LM324-15 LM320-15 LM324-50 The +ve LDO's share the same heatsink with insulator + plastic screws. To...
#3: Post edited
- I see 
- and from the photo left to right , the 3 regulators are ;
- +15, -15 , + 5.0
- LM324-15 LM320-15 LM324-50
- The +ve LDO's share the same heatsink with insulator + plastic screws.
- To sharing Dgnd noise with analog ground , you can use Dgnd from the 5V out using this photo.
- 
- I see 
- and from the photo left to right , the 3 regulators are ;
- +15, -15 , + 5.0
- LM324-15 LM320-15 LM324-50
- The +ve LDO's share the same heatsink with insulator + plastic screws.
- To sharing Dgnd noise with analog ground , you can use Dgnd from the 5V out using this photo.
- 
- There should be only 2 secondary gnds on transformer!
- If it is not wired like schematic, fix it.
- 
#2: Post edited
- I see 
- and from the photo left to right , the 3 regulators are ;
- +15, -15 , + 5.0
- LM324-15 LM320-15 LM324-50
- The +ve LDO's share the same heatsink with insulator + plastic screws.
To avoid analog ground noise, you can use Dgnd from the 5V out using- 
- I see 
- and from the photo left to right , the 3 regulators are ;
- +15, -15 , + 5.0
- LM324-15 LM320-15 LM324-50
- The +ve LDO's share the same heatsink with insulator + plastic screws.
- To sharing Dgnd noise with analog ground , you can use Dgnd from the 5V out using this photo.
- 
#1: Initial revision
I see  and from the photo left to right , the 3 regulators are ; +15, -15 , + 5.0 LM324-15 LM320-15 LM324-50 The +ve LDO's share the same heatsink with insulator + plastic screws. To avoid analog ground noise, you can use Dgnd from the 5V out using 