Resistance of digital ampmeter
Can we find the internal resistance of a multimeter ,when we use the multimeter like a ampmeter, from its datasheet?
I am trying to find the internal resistance of IDM 505 and I went to the datasheet to the current section and the most relevant thing I could find was the accuracy but as far as I know we cannot translate the accuracy to the internal resistance when used as a ampmeter.Any help?
I am asking because I didn't go to university today and we had lab hours. In the laboratory we use a Protek IDM 505 and I didn't measure some circuits which are for homework so I am searching it online to see if I can find anything.
2 answers
You are accessing this answer with a direct link, so it's being shown above all other answers regardless of its score. You can return to the normal view.
What you linked to is more of a user's manual than a datasheet. Particularly for more consumer-oriented meters, this spec may not be explicitly available.
However, you can easily measure it. Use an ohmmeter to measure the resistance of the ammeter. You should see the ammeter report a small current. You should also see that the resistance goes down as you switch to less sensitive scales on the ammeter.
A good guess is that the voltage developed across the current-sense resistor at full scale is the same as the full scale voltage of the most sensitive voltage scale. That's usually what the native meter does internally. Different current scales then basically switch different resistors across this internal voltmeter.
For example, let's assume the most sensitive voltage setting goes to 200 mV full scale. If the lowest current scale goes to 2 mA, then the resistance of that current scale is probably (200 mV)/(2 mA) = 100 Ω. For the 20 mA scale, it would be 10 Ω, for 200 mA 1 Ω, etc.
0 comment threads
1 comment thread