Posts by mohammadsdtmnd
I've heard that arc welding is getting done with low voltage. I believe arcing requires high voltage. Then how is arc welding done with about 50 volts? I thought we need kilovolts for arcing. Why? ...
As we know audio has high dynamic range. It means 120dB dynamic range of human ear causes to hear 1 million time samaller that highest undistorted accoustic wave. Then I think for high end audio we...
The problem was the transient you can see in the first picture, the blue one. When I connect the scope to it, it becomes stabilized. Otherwise it is noisy and because of this the other signal chang...
In protocol I2S we have 3 signal + one none standard master clock(Mentioined by Olin Lathrop): 1.data 2.lrck/fck (frame synchronizer) 3.bck (bit clock) 4.mck/sck (master clock) Question 1: Why we...
I have a HANTEK 6022BE oscilloscope and I'm monitoring three signals with it: FS (Frame sync clock). Pulse. Transfer complete. I'm using two channels of the scope to monitor a pair of these...
Question 4 solved: The datasheet lacks the information I've copied from PCM5122:
Mini-circuits LNA PHA-LN13+ has suggested: Eval board Layout Eval Gerber The image took from the Gerber file (3rd ref.) (Though all 3-reference mentioned containing it): There I have som...
I've tryed to implement a local ground concept told by Olin Latrop here : He have told: (What I've perceived)You should not connect every gnd point instantly to gnd plane, since it can inject HF ...
